Hybrid control panel for Ajax Hub Hybrid signaling (4G and 2G)
A security alarm system is used for timely detection of violations in the territory under protection. The purpose of the security system is:
Guaranteed detection of intrusion into the territory under protection.
Immediately notify the security service or the owner of the threat.
These tasks are solved by the correct installation of security devices and competent equipment. The choice of the type of alarm system for the protection of the premises depends on several factors, important: the features of the protected space, the type of object, the need to connect the alarm system to the central console of the security company or the transmission of an alarm signal to the local security service of the object, the stage of repair or construction of the premises. A full-fledged security alarm system includes a set of software and hardware devices. The security system usually includes: a control panel, sensors (penetration, opening, movement, etc.), alarm buttons. Data on incidents and the current situation at the facility under protection are received automatically from sensors, or from alarm buttons when the alarm is manually activated. IR motion sensors, reed door sensors, contact or ultrasonic glass break sensors, vibration and other types of detectors are used in security systems. Additionally, when used in integrated security and fire alarm systems, temperature sensors, smoke detectors, and in some cases, gas and water leakage sensors in office or residential premises are connected. As alarm buttons, station alarm buttons or radio keyfobs are used. The main device of the security alarm system is the control center of the security system, which receives information about all events on the territory under protection. Depending on the settings and the type of control panel, it can perform a number of functions when an emergency detection signal is received. Usually, for continuous operation, central alarm systems are equipped with spare communication channels and backup power sources. When the panel receives an alarm signal, it activates sound or light warning systems. Alarm systems come in various types and purposes. When the security alarm is activated, a siren or other audio-visual detectors may be triggered. The signal can be sent to a control system or a centralized security console using a radio channel, GSM, or a telephone line. Depending on the settings, it is possible to inform users about events by SMS messages, push notifications or calls. Alarm reception and control centers are designed to collect information from various types of sensors connected to it, to send an alarm signal and to control various automation devices through built-in relays. Various types of fire and security sensors are connected to the central security system, as well as sirens, light and sound alarm detectors, electronic key readers, control keyboards and light sources. In addition, control panels can collect information from wireless sensors and video cameras, depending on the model. In most cases, the control panel housing is made of plastic or metal, and the printed circuit board has terminal blocks for connecting wires. In some types of control panels there is a place for a battery and there is a power supply. A GSM module for sending messages and transmitting information can be located on the alarm central board or separately in the case. Alarm control panels are programmed using utility programs using a laptop. Programming means the configuration of the security device for the needs of the user on an individual basis.
Ajax Hub Hybrid (4G and 2G) — hybrid central alarm system
The Ajax Hub Hybrid Alarm Center (4G and 2G) is the first Ajax control panel with support for new wired devices of the Fibra line and Jeweller wireless devices. The device monitors the operation of all Ajax sensors connected to the security system and sends an alarm signal to the owner and to the security console immediately after the threat is detected. The Hub Hybrid alarm control panel (4G and 2G) supports sensors with photo fixation, and also has 8 independent lines with support for the "ring" topology. Provides a range of communication with Ajax detectors up to 2000 meters via the Jeweller radio protocol in the absence of obstacles. And the Fibra wired technology allows you to create independent lines up to two km long. The operating frequencies of the central are 868.0—868.6 MHz. The device supports operability using 2G, 3G and 4G/LTE Ethernet networks. The combination of two technologies allows you to build a comprehensive protection of the territory, regardless of the size and ceilings and metal or concrete. The protection is enhanced by informative messages and photoverification of alarms, full real-time control of the system from the Ajax mobile application and automation scenarios that are configured individually. The Hub Hybrid central alarm system (4G and 2G) is made in a laconic design made of durable plastic. The appearance is versatile and suitable for installation in any interior.
Hub Hybrid Control Panel Features (4G and 2G)
Fibra Technology Using Fibra, Hub Hybrid (4G and 2G) wired communication technology creates independent lines up to 2 km long. 8 lines in one system under the control of Hub Hybrid (4G and 2G) white minimize the possibility of loss of communication and potential damage. Thanks to this principle of operation, even a complete breakage of one line leaves the security system working at 87%. And with wireless sensors in the system, this percentage becomes higher. Jeweler Technology The Jeweler two-way radio protocol provides Hub Hybrid (4G and 2G) communication with the system detectors at a distance of up to 2000 meters in the absence of obstacles. Jeweler allows you to remotely control the security system and transmits alarms in 0.15 seconds. The wireless radio protocol uses frames to encrypt communications, to protect data from theft, to synchronize device communication sessions, and authentication to exclude forgery. The energy-efficient protocol allows wireless security sensors to operate for up to 7 years from complete batteries. Up to 5 repeaters with a communication range of up to 1800 meters can be connected to the Hub Hybrid (4G and 2G) via radio or Ethernet cable. Photoverification of alarms in 9 seconds Hub Hybrid (4G and 2G) supports wireless motion sensors MotionCam Outdoor and MotionCam. Sensors take a series of pictures immediately when motion is detected, and allow you to assess what is happening on the object in dynamics. Wings radio protocol is used to quickly transmit a series of photos and verify the delivery of photo confirmations. Ajax Hub Hybrid (4G and 2G) is always online over cellular networks and through a cable connection Hub Hybrid (4G and 2G) can be connected simultaneously to three Internet providers - via Ethernet cable and 2G cellular networks. Automatic switching between communication channels takes several seconds. The backup battery of the Hub Hybrid alarm control panel can power a system of 30 wired devices for 60 hours. And the devices connected by radio do not need additional power and operate from their own built-in batteries. Antisabotage With the presence of tampers on the device body, attempts to dismantle and open the case are determined. The Ajax Cloud Cloud server polls the Hub Hybrid (4G and 2G) at intervals of 10 seconds and determines its operability. In case of disconnection of the wired Internet and simultaneous jamming of mobile communication frequencies, the server can inform the security panel about the isolation of the object after 1 minute. To authenticate the system's devices, unique properties and tokens are used, which the hub checks at each communication session. If any of the parameters does not pass verification, the control panel ignores the device's commands. The procedure excludes the possibility of controlling the system by a third-party device: a keychain, a keyboard or a smart button. Detection of jamming and loss of communication in less than a minute Hub Hybrid (4G and 2G) analyzes the quality of communication with connected devices. If some of the packets are lost, the central changes the frequencies for transmitting information and informs the remote control about interference in the air. There is data protection by frequency hopping and encryption. All transmitted data is protected by block encryption with a floating key. In radio transmission, frequency hopping complicates the interception of information and jamming of the signal. Hub Hybrid (4G and 2G) polls devices with a frequency of 12 seconds. The frequency of polling of wireless devices is set by the administrator, and for wired devices hub determines the minimum possible interval automatically. Thanks to this principle of operation of the central, it takes from 36 seconds to detect the loss of the device from the communication and not
